3045-W – KTR

505-3001 3045-W Panic Switch

Michele Birtchnell — Fri, 21 Oct 2016 03:39:38 +0000

The 3040 Series Panic Switch activates the SPDT switch (SPST on the 3045 model) when the user pulls the actuating lever. On the 3040 model, an external LED lights and latches, indicating that the alarm circuit has been activated. The lever is closed first to rearm the alarm switch, then the latching LED circuit is reset externally at the host panel. The 3045 model has no LED or latching circuit.

507-3011 Rosslare Keypad

Michele Birtchnell — Thu, 26 May 2016 23:58:06 +0000

507-3001

Rosslare, Keypad, ACOO68 (AYC-E55) Ultra Slim Secure Vandal Resistant Metal Piezo Keypad, Standalone PIN Controller Mullion (2×6)

Features

Supports 4- to 8-digit PIN credentials
Smooth, attractive design, for all-weather indoor and outdoor operation
Large, highly visible piezoelectric keypad
2 tri-colored LEDs and an integral sounder for programming and operation
User-friendly menu system based on keypad, LED, and sounder indicators
Optical back tamper detection output
Default operation as a multi-format reader
Automatically recognizes Rosslare’s PS-x25T intelligent power supply family converting it into a 500-user standalone controller with secure relays

Product Data Sheet

500-1212 3 LED RAS, keypad

Michele Birtchnell — Mon, 23 May 2016 02:13:29 +0000

The keypad may be connected directly to the Challenger RS-485 LAN, up to 1.5 km from the Challenger panel or Intelligent Access Controller. It has an input for request to exit (RTE) control and an open collector output that can be used to control a door relay or door strike. The keypad's performance and robust construction make it suitable for a wide range of applications, including dusty or wet environments (rated to IP67). It may be used as a Challenger system remote arming station.

507-4029 Reed switch 3/4″ gap recessed

Michele Birtchnell — Thu, 19 May 2016 23:50:46 +0000

507-4029

Reed switch recessed Sentrol 3/4″ gap in steel 3/4″ dia 12″ lead natural finish

Features

Fly Leads and Terminal Options Available
Designed Specifically for Use in Steel Doors
Special Ribbed Sides Allow for Easy Installation
Rugged Unibody Construction for Maximum Durability and Reliability
Terminal models available for easier installation
Rare earth magnet designed for steel door w/top channel available

505-3001 3040-W Panic Switch

Michele Birtchnell — Wed, 18 May 2016 03:38:33 +0000

505-3001 3040-W

Sentrol Panic Switch 3045-W with Terminals, SPST, Surface Mount, Screw Terminals, Single Pole-Single Throw

Features

Easy Installation
Latching LED and Non-LED Models Available
3050 and 3055 Feature Glowing LED for Low Light Visibility

507-4021 Reed switch 3/4″ gap recess

Michele Birtchnell — Wed, 18 May 2016 03:00:09 +0000

The 1078/1076 Series Steel Door contacts are designed specifically for use in the steel doors commonly found in commercial building applications. The unique housing design features a rugged unibody construction with flexible ribbed sides for quick, secure installation without gluing. The magnet housing isolates the magnet from the surrounding steel for maximum gap distances, both make and break. Over seven models including: Wide Gap, SPDT, DPDT, and Biased for High Security applications make the 1078/1076 Series the most widely used and comprehensive line available.

507-4095 Overhead Door Floor Mount

Michele Birtchnell — Sun, 15 May 2016 23:04:06 +0000

507-4095

Reed switch surface Sentrol Closed Loop, 3” Gap overhead 18″ lead aluminium contact with Universal Magnet.

Miniature, Low-profile Design
Stainless Steel Armored Cable for Added Security, Reliability
Wide Working Gap for Overhead Doors
Small Size Less Likely to be Damaged by Forklifts
Aluminum Bar Stock Resists Corrosion in Harsh Environments
Mounting Hardware Included
Jacketed Lead Available
Fully Sealed Switch
Form C Unit Available

500-1205 8-Area Arming Station

Michele Birtchnell — Thu, 12 May 2016 04:18:08 +0000

The TS0801 Arming station is one of the most widely recognised keypads in Australia and New Zealand. It is easy to install and has been the face of the Challenger system for nearly 20 years. The CA111x series keypad replaces the TS0801 but is still fully supported and available for purchase. It is typically used as a replacement unit for Challenger sites that require matching look/style keypads. The TS0801 Remote Arming Station has a clearly readable English text LCD for displaying system programming, alarm and access control functions. It can be mounted at a distance of 1.5km from the Challenger Panel or Access Controllers. The face of the Arming Station displays 8 programmable area status indicator LED?s, while the LCD details alarms or preprogramed scrolling text.

507-4025 Reed switch, recessed, 1/2″ gap

Michele Birtchnell — Thu, 12 May 2016 03:47:27 +0000

3045-W – KTR

505-3001 3045-W Panic Switch

507-3011 Rosslare Keypad

500-1212 3 LED RAS, keypad

507-4029 Reed switch 3/4″ gap recessed

505-3001 3040-W Panic Switch

Panic Switch, SM, Latching, Red LED, SPDT, White

507-4021 Reed switch 3/4″ gap recess

507-4095 Overhead Door Floor Mount

500-1205 8-Area Arming Station

507-4025 Reed switch, recessed, 1/2″ gap