500-1304 – KTR https://ktr.com.au Leading the way in Security and Healthcare. Wed, 22 Aug 2018 04:12:49 +0000 en-AU hourly 1 https://wordpress.org/?v=6.2 500-1804 65 K User 8 Meg IUM https://ktr.com.au/product/500-1804-65-k-user-8-meg-ium/ Thu, 08 Sep 2016 04:31:45 +0000 https://ktr.com.au/product/500-1804-65-k-user-8-meg-ium/ 500-1804

TS0884 65 K User 8 Meg IUM

Features

  • Increases the total number of PIN or card users on the system
  • Allows card formats up to 48 bit
  • Adds to the number of door or floor groups, holidays, and access/alarm events on a system

 

]]> 500-1800 Memory Expansion https://ktr.com.au/product/500-1800-retrofit-1-meg-memory-expansion/ Thu, 08 Sep 2016 04:25:10 +0000 https://ktr.com.au/product/500-1800-retrofit-1-meg-memory-expansion/ Retrofit 1 Meg Memory Expansion Challenger memory expanders are used to expand the number of PINs or cardholders (users) in the system as well as the card format. Memory expansion chips are available in 1MB, 4MB, and 8MB. The TS0882, TS0883 and TS0884 memory expansion devices are fitted on Challenger control panels and door or lift controllers. All devices that support memory expansion must have the same unit fitted. The TS0883 and TS0884 have the intrinsic functionality of being an Intelligent User Module (IUM) that enable a Challenger system to handle multiple card formats and protocols simultaneously. Unknown card formats can be added to the system as raw card data and assigned to users with ease.]]> 500-1800

Features

  • Increases the total number of PIN or card users on the system
  • Allows card formats up to 48 bit
  • Adds to the number of door or floor groups, holidays, and access/alarm events on a system

 

]]> 500-1306 Input DGP Board https://ktr.com.au/product/500-1306-dc-four-input-dgp-board/ Thu, 08 Sep 2016 04:13:57 +0000 https://ktr.com.au/product/500-1306-dc-four-input-dgp-board/ DC four-input DGP Board TS082x series of data gathering panels (DGPs) are used to expand the number of inputs and outputs (or relays) on the Challenger system. DGPs allow installers to easily terminate wiring connections for inputs and relay outputs at locations away from the panel. Up to 15 DGPs can be connected directly to each Challenger control panel over a reliable RS-485 data bus, thereby minimizing cable runs. If a communications failure occurs, the data gathering panel remembers its last alarm, helping to identify possible reasons for faults.]]> 500-1306

4 Input Data Gathering Panel Board Only TS0827

Features

  • 4 zone inputs
  • DGPs are polled for online state
  • Tamper input

 

]]> 500-1304 Wireless DGP https://ktr.com.au/product/500-1304-wireless-dgp-inovonics-ecostream/ Thu, 08 Sep 2016 03:42:10 +0000 https://ktr.com.au/product/500-1304-wireless-dgp-inovonics-ecostream/ Wireless DGP Inovonics, Ecostream The TS0825E Wireless Data Gathering Panel (WDGP) is used to provide cable-free installation of devices to your Challenger system such as PIRs, smoke detectors, and glass break detectors while supporting single and multi-button pendants and remotes. The TS0825E helps eliminate problems such as wiring security devices to Challenger through concrete walls or floors, securing heritage buildings (no drilling allowed) or wiring to detached structures such as sheds or garages. (Eliminate cost of trench digging).]]> 500-1304

Inovonics EchoStream Wireless DGP TS0825E

Features

  • Expand the Challenger by up to 16 or 32 inputs
  • 1.5km from the Challenger panel
  • Works with Inovonics repeaters to extend wireless range
  • 1,024 duress inputs
  • Transmitter ID is registered into a database held in the TS0825E WDGP
  • Rear and front tamper protection

 

]]>