Mimic Display Driver – KTR https://ktr.com.au Leading the way in Security and Healthcare. Wed, 22 Aug 2018 04:25:00 +0000 en-AU hourly 1 https://wordpress.org/?v=6.2 900-0147 24VDC Regulator https://ktr.com.au/product/900-0147-24vdc-step-down-power-supply/ Wed, 10 Aug 2016 03:28:23 +0000 https://ktr.com.au/product/900-0147-24vdc-step-down-power-supply/ 24VDC Step Down Regulator Powerful step down power supply which can be used when projects need to supply regulated power to embedded PCs, micro controllers and large amounts of peripheral devices. The step down power supply is highly efficient which can save money on operation costs. The step down power supply can provide serial output to smart devices providing advanced warning messages to alert users. The micro controller onboard monitors all voltage rails and provides LED output terminals which can be wired to illuminated pushbuttons or LED warning panels, no resistors necessary, all resistors are surface mounted to make installation easier. The LED outputs are rated at 250mA each and will flash for over voltage or under voltage and steady on for normal state. The Step Down Power Supply has large barrier terminals for the 12VDC 8 Amp, terminals for 12VDC 1.5 Amp and USB Socket Type A for the 5VDC 2 Amp.]]> 900-0147

The 900-0147 Step Down Regulator is used to convert our existing 24vdc power supply to a regulated 12VDC 8 Amp, 12VDC 1.5 Amp and 5VDC 2 Amp.

Features

  • Reverse input power protection
  • Input power barrier protection terminals
  • Output power 12VDC 8 Amp barrier protection terminals
  • Short circuit protection
  • LED’s for 24V in, 12V 5A out, 12V 1.5A internal, 5V 2A internal all with pin header connection on PCB
  • LED output terminals rated at 250mA each
  • Highly Efficient
  • USB Socket Type A for 5VDC 2 Amp output
  • Microcontroller to monitor voltages and activate LED’s giving true status of supplies
  • Additional provision for serial comms port and Aux. control/function port for any future expansion
  • PCB dimensions are approximately 75mm x 100mm x 32mm
  • Unit can fit in a 1RU vented chassis lying flat

Download Product Data Sheet

 

]]> 700-1103 Data Interface https://ktr.com.au/product/700-1103-serial-data-interface/ Sun, 07 Aug 2016 23:26:45 +0000 https://ktr.com.au/product/700-1103-serial-data-interface/ Download Product Data Sheet]]> 700-1103

KTR SDA/SDT  Serial Data Accumulator and Transmitter

Features:

Challenger End or Serial Output End : (SDA)
• High level interface from either Computer or TCP/IP
add-on cards with serial printer port
• 3 separate stacks for 3 different priority signals
• 40 message capacity per stack
• Prioritizes messages and displays accordingly
• Sets a time stamp from the Challenger upon initialization
• Communications and System failure indicators
• Message buffer overflow indication on display
• Displays only selective data depending on STAR
CHARECTERS programmed in the Challenger printer string
• Standard Communication speed: 9600 baud
• Standard mounting holes to suit Challenger enclosures

Display End (SDT)
• Displays data transmitted from the Challenger serial port
• Keeps track of how long a message is being displayed and generates an audio alarm at the display end if message is not cleared within a specific time
• No external power supply required (Uses LAN power) unless very long cable run is used
• Extern power supply facility if needed
• 16 possible address expandable to 32
• Can handle up to 120 messages at a time
• Mounted in elegant HPM wall plate
• Data back up if there is system failure( as long as there is power)

 

]]> 700-1104 Mimic Display Driver https://ktr.com.au/product/700-1104-mimic-display-driver/ Sun, 07 Aug 2016 23:11:21 +0000 https://ktr.com.au/product/700-1104-mimic-display-driver/ 700-1104

MDD1214 Mimic Display Driver For Tecom Challenger Systems V10

Features:

  • Time saving ultra quick and easy installation.
  • No resistors,  soldering,  relays cards and macros
  • 1 looped Cat 5/6 cable to all modules, up to 1 KM transmission distance.

 

]]>